LIQUID POOL BLANKET
Prevents evaporation of water and the loss of temperature.
Forms an invisible barrier on the surface of the water.
Reduces evaporation by approximately 25%.
Reduces temperature loss by 3-4 degrees.
Compatible with all types of swimming disinfection treatments.
Liquid Pool Blanket is a specially blended formula that forms a protective layer on the pool water surface, reducing evaporation and heat loss to the atmosphere. Liquid Pool Blanket is compatible with all pool chemicals and has minimal impact on pH. A 1 litre bottle will provide 4 months of treatment for a 50,000litre pool.
This product has been recognised by the Swimming Pool & Spa Association of Australia Ltd (SPASA) being “Climate Care Certified” part of their new Climate Care Certification programme.
GENERAL INSTRUCTIONS
APPLICATION INSTRUCTIONS:
- Shake well before use.
- Dose the required amount of Liquid Pool Blanket, whilst the pumps are turned ‘on’ to assist product distribution. Run the pumps for at least an hour after application, before allowing the invisible pool blanket to form on the still water surface – it’s optimal working conditions.
- Repeat dose every month.
Please Note:
- In very cold water, below 18°C (65°F), some harmless residue/cloudiness may be created that should disappear within 24 hours.
- Do not store product at temperatures below 4°C (40°F).
- Do not allow the product to freeze.
DOSE RATE TABLE
Pool Volume |
Dose |
Gallons |
Litres |
|
5,500 |
25,000 |
125ml |
11,000 |
50,000 |
250ml |
16,500 |
75,000 |
375ml |
POOL COBERTOR LÍQUIDO
Previene la pérdida de calor.
Forma una barrera en la superficie del agua.
Reduce la evaporación en aproximadamente un 25%.
Pool Cobertor Líquido es una fórmula especial que forma una capa protectora en la superficie del agua de la piscina. Reduce la evaporación y la pérdida de calor a la atmósfera. Pool Cobertor Líquido es compatible con todos los tratamientos químicos y desinfectantes para piscinas, y tiene un impacto mínimo sobre el pH. Una botella de 1 litro proporcionará 4 meses de tratamiento en una piscina de 50.000 litros.
INSTRUCCIONES DE USO:
- Agitar bien antes de usar.
- Añadir a razón de 250 ml de Pool Cobertor líquido para una piscina de 50.000 Ltrs, con la bomba en funcionamiento para facilitar la distribución del producto. Mantener en marcha las bombas al menos una hora después de la aplicación del producto, para permitir la formación de la capa protectora invisible sobre la superficie del agua.
- Repetir la dosificación una vez al mes.
ATENCIÓN
- En agua muy fría (por debajo de 18°C), puede aparecer algo de turbidez o la aparición de residuos no peligrosos que deberían desaparecer transcurridas unas 24 horas, (aprox.)
- No almacenar el producto a temperaturas inferiors a 4°C.
- No permitir la congelación del product.
DOSIFICACION:
Volumen Piscina |
Dosificacion |
Galones |
Litros |
|
5,500 |
25,000 |
125ml |
11,000 |
50,000 |
250ml |
16,500 |
75,000 |
375ml |