Email: info@lo-chlor.co.uk | Tel: +44 (0) 1639 823 233

HOT TUB PROBLEMS

Owning and using a Hot Tub is a great life experience and whilst the volume of water is much less than a swimming pool there is a requirement for daily checks and regular chemical dosing. As Hot Tubs run at a much higher operating temperature than swimming pools, typically 36-38 degrees Celsius, then the higher temperature factor can accelerate hot tub problems when things start going out of balance.

 

CLOUDY OR MILKY HOT TUB WATER

Cloudy water is caused by small particles floating in the water. Your hot tub can take on a milky appearance which makes it difficult to see the bottom of the tub. Both these problems could be caused by many reasons such as poor filtration (dirty filters), heavy usage or poor water chemistry.

INSTANT FILTER CLEANER

Instant Filter Cleaner

Use Instant Filter Cleaner to clean your filters as this tends to be the main cause of water quality issues.

ULTRA SPA CLARIFIER

Ultra Spa Clarifier

Use Ultra Spa Clarifier as it will clump together the small particles so they can be filtered, this may allow for the water to clear.

HOT TUB SYSTEM FLUSH

Lo Chlor Spa & Hot Tub Cleaner

Use Hot Tub System Flush to flush through the internal pipework of the spa in order to remove body fats and other organic debris from the system.

 

FOAMING HOT TUB WATER

When foam is present in your spa or hot tub it is a sign that your water is out of balance, in particular high levels of unwanted dissolved compounds. These arise from sweat, oil, shampoo and soap that wash off users of the spa or hot tub. Combined with the higher running temperature, vigorous agitation of the water and the introduction of air, unwanted foam occurs.

NO MORE FOAM

No More Foam

Use No More Foam with the circulation pump(s) running to help distribution. You need to remember that this product does not remove or inactivate foam causing compounds. It only temporarily reduces their ability to produce foam. Always encourage users to shower before use to help minimise foaming of the water.

 

HOT TUB COVER CRACKING & FADING

Your hot tub cover is subject to all weather conditions and the outdoor environment itself and needs to be looked after. These conditions can crack and fade your cover very quickly making its appearance lacklustre.

HOT TUB & SPA POLISH

Hot Tub & Spa Polish

Use Hot Tub & Spa Polish to seal, polish and protect all your acrylic, vinyl and rubber surfaces. Once applied it will protect these surfaces against unwanted moisture, degradation from harsh chemicals and the suns UV rays thus prolonging their life cycle.

VINYL RESTORER & PROTECTOR

Vinyl Restorer & Protector

Use Vinyl Restorer & Protector to restore and protect Spa & Hot Tub vinyl covers. It’s completely water repellent, it remains effective for up to 30 days and has built in SPF protection.

Distributors

At Lo-Chlor we look to choose long term partners for our brand. For more information on our Distributors click here.

Address

Lo-Chlor Chemicals Limited
Unit 6
Seaway Parade Industrial Estate
Baglan
Port Talbot
SA12 7BR