BLACK SPOT ALGAECIDE
Concentrated formulation.
Can be used in all types of pool finishes.
Compatible with all recognised sanitisers and other pool additives.
This product is NOT compatible with Baquacil (polyhexamethylenebiguanide) or similar PHMB products.
Black Spot Algaecide is a concentrated formulation specifically designed for treating clinging algae, particularly Black Spot in all types of pools.
Use algaecides safely. Always read the label and product information before use.
GENERAL INSTRUCTIONS
If algae is present prior to application, it is recommended that it is treated before adding Black Spot Algaecide. Shock dose the pool with a suitable chlorine shock and run filtration for 24 hours.
- Ensure bathing has ceased before applying this product.
- Clean pool thoroughly, brush walls and floor with a stiff pool brush and vacuum to waste.
- Adjust the pH to between 6.8 – 7.0.
- Continue to run the pump and filter as normal.
- Shock dose the pool with a suitable chlorine shock and run the pump and filter for 24 hours.
- After 24 hours pour the calculated volume of Black Spot Algaecide near the algae (refer to the table provided). DO NOT ADD THE PRODUCT VIA THE POOL SKIMMER!
- After treatment wait 24 hours, adjust sanitiser levels accordingly and run the pump and filter as normal.
CAUTION: When dosing the product excessive copper concentrations may discolour hair and swimwear as well as pool surfaces.
During the treatment, use of other copper based pool chemical is not recommended. We recommend using Lo-Chlor Starver® or Starver® X after shock dose to assist with the removal of phosphate from your pool water. Doing this prior to adding Black Spot Algaecide improves product efficiency. REMEMBER NO PHOSPHATES = NO ALGAE.
BLACK SPOT ALGAECIDE DOSE RATE TABLE
| Pool Volume |
Dose |
| Gallons |
Litres |
|
| 5,500 |
25,000 |
500ml |
| 11,000 |
50,000 |
1000ml |
| 16,500 |
75,000 |
1500ml |
N.B. Copper in water reduces the activity of chlorine and bromine. Check chlorine or bromine levels 24 hours after applying this product and adjust according to the required levels. Copper concentrations in the swimming pool water must not exceed 1mg/ltr. Check copper levels with a suitable copper test kit.
BLACK SPOT ALGAECIDE
Concentrated formulation.
Can be used in all types of pool finishes.
Compatible with all recognised sanitisers and other pool additives.
This product is NOT compatible with Baquacil (polyhexamethylenebiguanide) or similar PHMB products.
Black Spot Algaecide is a concentrated formulation specifically designed for treating clinging algae, particularly Black Spot in all types of pools.
Use algaecides safely. Always read the label and product information before use.
GENERAL INSTRUCTIONS
If algae is present prior to application, it is recommended that it is treated before adding Black Spot Algaecide. Shock dose the pool with a suitable chlorine shock and run filtration for 24 hours.
- Ensure bathing has ceased before applying this product.
- Clean pool thoroughly, brush walls and floor with a stiff pool brush and vacuum to waste.
- Adjust the pH to between 6.8 – 7.0.
- Continue to run the pump and filter as normal.
- Shock dose the pool with a suitable chlorine shock and run the pump and filter for 24 hours.
- After 24 hours pour the calculated volume of Black Spot Algaecide near the algae (refer to the table provided).DO NOT ADD THE PRODUCT VIA THE POOL SKIMMER!
- After treatment wait 24 hours, adjust sanitiser levels accordingly and run the pump and filter as normal.
CAUTION: When dosing the product excessive copper concentrations may discolour hair and swimwear as well as pool surfaces.
During the treatment, use of other copper based pool chemical is not recommended. We recommend using Lo-Chlor Starver® or Starver® X after shock dose to assist with the removal of phosphate from your pool water. Doing this prior to adding Black Spot Algaecide improves product efficiency. REMEMBER NO PHOSPHATES = NO ALGAE.
BLACK SPOT ALGAECIDE DOSE RATE TABLE
| Water Volume |
Dose |
| Gallons |
Litres |
|
| 5,500 |
25,000 |
500ml |
| 11,000 |
50,000 |
1000ml |
| 16,500 |
75,000 |
1500ml |
N.B. Copper in water reduces the activity of chlorine and bromine. Check chlorine or bromine levels 24 hours after applying this product and adjust according to the required levels. Copper concentrations in the swimming pool water must not exceed 1mg/ltr. Check copper levels with a suitable copper test kit.
BLACK SPOT ALGAECIDE
Formulazzjoni ikkonċentrat iddisinjat speċifikament għat-trattament ta ‘ l-Alka clinging, partikolarment iswed post fit-tipi kollha ta ‘ l-għadajjar.
Li jistgħu jintużaw fit-tipi kollha ta ‘ finituri pool.
Kompatibbli mal-sanitisers kollha rikonoxxuti u l-addittivi l-oħra pool.
Dan il-prodott MHUWIEX kompatibbli ma’ Baquacil Polyhexamethylenebiguanide jew ma’ prodotti PHMB simili.
Black Spot Algaecide huwa formulazzjoni konċentrata mfassla speċifikament għat-trattament tal-alka persistenti, b’mod partikolari t-Tbajja’ Suwed f’kull tip ta’ pixxina.
MCCAA Notification Reference Number: 2017-02-08-B01
Uża l-algaċidi bla periklu. Dejjem Aqra l-informazzjoni tikketta u prodott qabel l-użu.
STRUZZJONIJIET ĠENERALI
- Kun ċert/a li ma jsirx għawm meta tapplika l-prodott.
- Naddaf il-pixxina sewwa, xkupilja l-ħitan u l-art permezz ta’ xkupilja soda tal-pixxini, sakemm tneħħi kollox u erġa’ aħsel bil-kontra.
- Aġġusta l-pH għal bejn 6.8 – 7.0.
- Kompli ħaddem il-pompa u l-filtru b’mod normali.
- Agħti d-doża kollha f’daqqa ta’ kloru adatt lill-pixxina u ħaddem il-pompa u l-filtru għal 24 siegħa.
- Wara 24 siegħa ferra’ l-volum ikkalkulat ta’ Black Spot Algaecide ħdejn l-alka (irreferi għat-tabella t’hawn taħt). IŻŻIDX IL-PRODOTT PERMEZZ TALISKIMMER TAL-PIXXINA!
- Wara t-trattament stenna 24 siegħa, aġġusta l-livelli tas-sanitiżer bix-xieraq u ħaddem il-pompa u l-filtru b’mod normali.
ATTENZJONI: Meta tiddoża l-prodott, il-konċentrazzjonijiet eċċessivi tar-ram jistgħu jibdlu l-kulur tax-xagħar, tal-ilbies tal-għawm, kif ukoll tas-superfiċji tal-pixxina.
BLACK SPOT ALGAECIDE IR-RATI TAD-DOŻA
| Il-Volum tal -Ilma |
Doża |
| Glalen |
Litri |
|
| 5,500 |
25,000 |
500ml |
| 11,000 |
50,000 |
1000ml |
| 16,500 |
75,000 |
1500ml |
ATTENZJONI: Il-konċentrazzjonijiet tar-ram fl-ilma tal-pixxina ma għandhomx jaqbżu 1 mg/ltr. Iċċekkja l-livelli tar-ram b’sett xieraq li jittestja r-ram.
