Lo-Chlor Chemicals – Solutions of swimming pool and spa problems

01639 823 233 | paul@totalwaterproducts.co.uk

Lo-Chlor Maxi-Floc Plus – A heavy duty flocculent with a built in accelerating agent for maximum efficiency. It will restore clarity to the cloudiest of pool waters in under 6 hours. This product leaves no messy residue and will also aid the removal of phosphates from your pool water.

Lo-Chlor Miraclear Liquid Pool Clarifier – Manufactured from a patented polymer resin, this clarifier is the ultimate clear water solution. It will clear the cloudiest water in a matter of hours and last up to 30 days.

Lo-Chlor Ultrakleer Plus 4 in 1 – Comprised from CHITOSAN this natural polymer is revolutionary as far as clarifying agents go. The product will remove body fats, oils, suntan lotions along with dissolved metals, particles and dead algae spores. CHITOSAN is the only natural clarifier on the market and is 100% biodegradable!

Lo-Chlor Miraclear Gel Cube – Revolutionary clarifier in a gel cube. Lasts for 30 days and will keep your pool crystal clear. 35gm cube treats up to 60,000 litres and the 70gm cube up to 120,000 litres of pool water. This product is ideal for cartridge filters and does not contain any aluminium and leaves no messy residue.

USAGE/CONDITION	PRODUCT TO USE	RATING
ADD SPARKLE	MIRACLEAR CLARIFIER MIRACLEAR GEL CUBE
CAN'T SEE THE BOTTOM OF THE POOL	MAXI-FLOC PLUS
GENERAL PURPOSE	MIRACLEAR CLARIFIER MIRACLEAR GEL CUBE
SUNTAN OILS IN WATER	ULTRAKLEER PLUS 4 IN 1
NEWLY FILLED POOLS	MIRACLEAR CLARIFIER ULTRAKLEER PLUS 4 IN 1
VERY CLOUDY	MAXI-FLOC PLUS MIRACLEAR CLARIFIER

Professional tips when using water clarifiers

•	Clear water is free from particulate matter. When particles of dust, dirt and other matter become suspended in clear pool water the water takes on a cloudy appearance. The degree of cloudiness is determined by the amount of suspended matter.
•	When using a clarifier, always adjust the pH to between 7.2 – 7.6.
•	Super-chlorination is always recommended prior to using a clarifier.
•	After using a clarifier it is always recommended you backwash your filter or rinse cartridges.

Professional tips when using Maxi-Floc Plus
The following tips are crucial when using Maxi-Floc Plus

•	pH must be adjusted to between 7.5 – 7.8.
•	ALWAYS super-chlorinate prior to adding Maxi-Floc Plus (you cannot floc living algae).
•	Check TDS levels (ideal is below 1500).
•	DO NOT OVERDOSE!